city coco electric scooter, after the key of the power supply lock is turned by a shift in clockwise direction for connection, the motor can be started up. During driving, you do not remove the key and switch off power supply, nor can you turn the key in counterclockwise direction to close the power supply local. Once you switch off the power supply, the motor will stop running.After parking, you should turning off the power and pull the key out.
How to start the engine of city coco electric scooter?
Main Technical Parameters:
I .Main technical parameters of the scooter:
| 1.Product Size: | 1962*318*1159mm |
| 2. Wheelbase: | 1482mm |
| 3. High: | 1159mm |
| 4. Weight: | 85kgs |
| 5. Tire specifications: | 215/40-l2 |
| 6. Maximum load: | 180kgs |
| 7. Design top speed: | ≤85km/h (4000w) |
| 8. Range: | 40~120km |
| 9.Maximum torque: | 120N/M |
| 10.Maximum climbing: | ≤25 |
| 11.Braking performance(20 km/h): | Dry:≤1m;Wet:≤3m. |
II .Main technical parameters of battery:
| 1. Battery type: | Lithium batteries |
| 2. Capacity: | 20AH-60AH |
| 3. Nominal voltage: | 60V |
III . Main technical parameters of motor:
| 1.Motor models: | Brushless dc motor hub |
| 2. Rated power: | 1500W/2000W/3000W/4000W |
IV . Main technical parameters of controller:
| 1. Current limiting protection value: | 70 + 1A |
| 2. Under-voltage protection value: | 48士0.5V |
V . Charger main parameters:
| 1.The input voltage(ac): | 100-240VAC50/60HZ |
| 2.The output voltage(dc): | 67.2~6.0A |
| 3. Charging time | 3-4 h |
